CNC Plasma cutter is for metal mateirals cutting.CNC Plasma power source have Chinese type and USA Hypertherm power type. If you need the metal cutting work demands,you need one cnc plasma machine or fiber laser cutting machine. Whats the difference between cnc plasma and fiber laser cutting machine ? CNC Plasma cutter is especially for the big thickness cutting and cheaper cost while fiber laser cutting machine cutting precision is higher and smaller cutting thickness with a more expensive cost.
CNC Plasma Cutter for sale
Brief information of 5'x10'CNC Plasma Cutter
SSP1530 PLASMA CUTTER
Workingarea:1500x3000mm(5'*10')
---Control system:Starfire + ARC torch height control system.
---Hypertherm plasma power supply/Chinese power supply
---Gear-wheel transmission
----Square rail not round rail.
---Original TBI rails not steel plate.
----FASTCAM Control Software
------Leadshine stepper motor and drivers
----With adjustable up-down device.
---collision avoidance systerm
Parameters of 5'x10' CNC Plasma Cutting Machine
Description | SP1530 Plasma cutter | Option |
Effective cutting area(X*Y) | 1500*3000mm(5’*10’/6.6’*13’) | 4’*8’/51’’*98”etc |
Working material | Iron, steel, sheets, galvanized sheets, titanium plates etc |
|
Cutting thickness | According to materials |
|
Plasma power | Hypertherm | Chinese |
Drive Mode | Bilateral-side | |
CNC system | Beijing START | Beijing Starfire |
Plasma cutting speed | 50-6500 mm/min | |
Cutting torch lifting distance | 150mm |
|
Speed setting error | ≤±5% | |
Torch height controller accuracy | ≤±1.0mm | |
Longitudinal line accuracy | ±0.2mm/10m | |
Motor and drivers | Stepper | SERVO |
Gearbox | Cast Iron (Better than welded) | |
Drive Method | Rack and square rails for Y axis | |
Rail Brand | Taiwan HIWN | PMI |
Moving Precision | 0.01mm per step | |
Power Source | 50 Hz or 60HZ 380V | 220V/110V |
Height controller(plasma) | PHC330-Arc voltage height controller for plasma cutting | |
Idling Cutting speed | 0-12000mm/min |
|
Input voltage | 3 phase 380V |
|
Files transfer | USB interface |
|
Arc | Untouched arc striking |
|
General machine accuracy | ±0.5mm |
5'x10' CNC Plasma Cutter Machine Details Pictures:
Starfire controller with THC
Starfire control system screen
Contact Us For Machine working video!