What are the advantages of laser cutting machine?
You are here: Home » CASE » Nonmetal Cutting Works » What are the advantages of laser cutting machine?

What are the advantages of laser cutting machine?

Views: 50009     Author: Site Editor     Publish Time: 2020-06-17      Origin: Site

Advantage 1-high efficiency.
Due to the transmission characteristics of the laser, the laser cutting machine is generally equipped with multiple CNC working tables, and the entire cutting process can be fully CNC controlled. During operation, only need to change the CNC program, it can be applied to the cutting of parts of different shapes, both two-dimensional cutting and three-dimensional cutting.

Advantage 2-fast speed.
Laser cutting 2mm thick low carbon steel plate with a power of 1000W, the cutting speed can reach 600cm/min; the material does not need to be clamped and fixed during laser cutting process.

Advantage 3-good cutting quality.
Firstly,The laser cutting incision is narrow and narrow, the two sides of the slit are parallel and perpendicular to the surface, and the dimensional accuracy of the cut parts can reach ±0.05mm.
Secondly, The cutting surface is smooth and beautiful, the surface roughness is only tens of microns, and even laser cutting can be used as the last process, without mechanical processing, and the parts can be used directly.
Thirdly, After the material is laser-cut, the width of the heat-affected zone is very small, the performance of the material near the slit is almost unaffected, and the workpiece deformation is small, the cutting accuracy is high, the geometry of the slit is good, and the cross-sectional shape of the slit is more Regular rectangle.

Advantage 4-cutting non-contact.
During laser cutting, there is no direct contact between the cutting torch and the workpiece, and there is no tool wear. For processing parts of different shapes, there is no need to change the "tool", only the output parameters of the laser need to be changed. The laser cutting process has low noise, small vibration and little pollution.

Advantage 5-more widely materials can be cut
Compared with oxyacetylene cutting and plasma cutting, there are many types of laser cutting materials, including metal, non-metal, metal-based and non-metal-based composite materials, leather, wood and fiber, etc.

Message now
  • Factory Address:100 Meters South of 
    Fengqi,Shizhong District,Jinan,China
  • call us on: