Laser Marking Machine for Rings

  In love. Everyone will pursue romance, eternity, a unique logo of a diamond ring, which may be the choice of many young people today. The laser marking machine remembers this warm and romantic moment and fulfills the promise of love. Can rings of all materials be marked with a laser marking machine?

    Here it can be said with certainty that all rings made of materials on the market are suitable for laser processing. The effect of fiber laser marking is to expose the deep material through the evaporation of the surface material, or to "carve" the material through the physical changes of the surface material caused by light energy. "Traces are produced, or part of the material is burned through light energy, and various graphics such as patterns, characters, and barcodes that need to be etched are displayed. Widely used in electronics, watches, jewelry, health equipment and other industries.

    When using a ring laser marking machine for engraving, the laser beam is used to act on the surface of the object to achieve the coding effect. The entire coding process has no direct contact with the ring, and no mechanical friction will be generated to damage the ring. The light spot is small, and the heat effect generated is also very small, so the mark produced by the ring laser marking machine is very beautiful, and there is no damage to the ring.

    With the development of society and the change of young people's ideas, ring lettering has become a popular trend. People like to customize a wedding ring that belongs to them. The high-precision characteristics of fiber laser marking machines are very suitable for precious and precise Small rings, necklaces and other jewelry are finished with wear-resistant long-lasting symbols on the surface, which contains infinite love.

    So how to engrave a ring with a laser marking machine?

1. There are some main parameters indicated by the side, and there are three small spaces, that is, the galvanometer is deflected by the galvanometer, and of course there are moving objects. This is the core component of the galvanometer for laser marking. Of course, there are many problems. For example, if there is a problem with the galvanometer, it needs to be repaired at any time. If there is a need, the software that needs to input the model is more solid and practical. Or it needs to be matched with a laser light source to turn on the vibrating mirror to find what we need, and it can also be easily faded.

2. During use, be sure to confirm the angle of the welding torch, the material to be marked and whether the marking position is firm. If you want to adjust the power and inductance according to the angle of the material, and the phenomenon of partial focus mode, Do not adjust the power to the proper range,

3. Marking effect (red laser marking machine)

Ultraviolet laser marking machines generally use infrared wavelengths. The ultraviolet laser with a wavelength of 1064nm is a cold light source with a wavelength of 10.6 microns, which has a greater effect in lasers. At the same time, the wavelength of the ultraviolet laser is generally a cold light source, because the wavelength of the ultraviolet laser is micron than that of the fiber laser, so the wavelength of the ultraviolet laser is short. Ultraviolet laser is a cold light source, which is mainly used for ultra-fine marking and special material marking. It is very different from ultraviolet lasers. Many customers do not understand that the power and pulse width of ultraviolet lasers are different from materials.